Showing all 3 results
-
Q-Tran® QZ-DMX
Multi-Channel LED DriverUse Q-Tran Drivers to Power IllumiTile®
The QZ-DMX is a versatile Class 2 LED driver with DMX control
capabilities with 24VDC (96W) constant voltage output. This innovative LED driver features up to 4 channel outputs that can power static white, static color, white-tunable, warm dim and dynamic color LED products. It may be configured with the Q-Tran NFC App fthat allows reading and writing DMX Addresses, along with
adjustment of the output voltage.- Constant 24V Volt (CV) Output
- 8 Bit DMX Control (DMX512)
- RDM Addressing
- NFC App for DMX Addressing & Voltage Adjustment
- Adjustable Output Voltage Range: 24V-26V
- IP66 Rated
- Suitable for Indoor Use
- Vertical or Horizontal Surface Mount
- Primary (AC) Input Voltage is Universal (100-277V)
- Wide Operating Temperature Range: -40˚F to +140˚F
- UL & cUL listed
- Type HL Rated
- Compliant to FCC 47 CFR Part 15 Subpart B
- 5 year warranty (from Q-Tran)
-
Q-Tran® QTM-DRIVE
LED DriversUse Q-Tran Drivers to Power IllumiTile®
QTM-DRIVE is an LED power supply for DMX or DALI control, and is available in 12VDC or 24VDC from 60 to 200 watts of power. The QTM-DRIVE utilizes eldoLED LINEARdrive drivers and is suitable for indoor use. Power supplies and modules are pre-wired along with convenient terminal blocks for power and control wiring. The housing can be recessed or surface mounted.
- DMX or DALI controllable
- Prewired for easy Connectivity
- Class 2 output
- Can fit up to 2 drivers
- Surface or recess mount capable
- Four 12VDC or 24VDC controllable outputs per driver
- Standby power: < 0.5W
- Flicker free operation
- Built-in surge protection: 3kV (L to N), 4kV (L/N to GND)
- Efficiency: 90% at full load, ≥ 87% above 50W output
- Power factor: > 0.94
- THD @ full load : <10%
- DMX dimming down to 0.1%
- Surface or Recessed Mounting
- Indoor Use
- 3 years warranty (from Q-Tran)
- CSA #239924 Low Voltage Lighting System
-
Q-Tran® QZ LED Drivers
Use Q-Tran Drivers to Power IllumiTile®
The QZ is a versatile Class 2 LED driver with dimmable or non-dimmable options. This LED driver offers 24VDC constant voltage output, and is available in 30 Watt up to 288 Watt (96W x 3 Driver) configurations. Pulse Width Modulation (PWM) output provides smooth, flicker-free dimming.
- Constant Voltage 24VDC Output (CV)
- Dimming Capable
Phase Dimming: Works with Forward Phase/Leading Edge,
MLV and Reverse Phase/Trailing-Edge, ELV, TRIAC Dimmers
Dimming Range: 0.1% – 100%
0-10V Dimming
1-10V Dimming
10V PWM
Potentiometer
Flicker-Free Dimming
High frequency WPM Output Reduces Visible Flicker- Follows Recommended Practices of IEEE Standard P1789 to Mitigate Flicker
- Vertical or Horizontal Surface Mount
- Input Voltage – Universal (110-277V)
- Wide Operating Temperature Range: -40˚F to +140˚F
- UL & cUL Listed
- Type HL Rated
- Compliant to FCC Part 15B
- 5 Year Warranty (from Q-Tran)
